With the development of the panel furniture decoration industry, many furniture factories have begun to replace manual work with machinery and equipment. However, due to a lack of understanding of the CNC cutting machine industry, customers often encounter various problems after purchasing the machine, which affects later use and delays the production progress. The following introduces several misunderstandings and points to note when purchasing a CNC cutting machine.

1. Spindle power of the CNC cutting machine: The power of the spindle affects the processing effect. If the processed products require cutting and material opening functions, it is recommended to choose a high-power spindle, which has a fast cutting speed and good effect. Generally, customers now choose a 6KW spindle or a 9KW spindle with automatic tool change, which is determined according to the machine model and process.

2. Adsorption table: The structure and design of the adsorption table of the CNC cutting machine are also related to the adsorption effect during the post-processing of the furniture factory. Now, it is generally a double-layer vacuum adsorption table with an air storage chamber in the middle, and the effect is relatively good.

3. Adsorption pump: The vacuum pump supporting the CNC cutting machine is also very important. The adsorption pumps are divided into air-cooled and water-cooled adsorption pumps. The noise of the air-cooled adsorption pump is a bit louder, and the water-cooled one with the same power has greater suction. However, when using a water-cooled adsorption pump in the north, attention should be paid to the problem of anti-freezing in winter (generally, clean water or processing antifreeze is used every day). After comprehensive comparison, the water pump has a low cost and low subsequent maintenance costs, so more users choose it.

4. Machine body of the CNC cutting machine: Why are the body frames of the CNC cutting machine and the ordinary woodworking engraving machine different, although they both belong to the woodworking industry equipment? As mentioned above, the servo motor runs faster than the ordinary motor, so the stability of the machine body needs to be ensured. Poor stability will affect the processing accuracy. If the bed frame is not heavy enough and the accuracy is not high enough, using the best accessories will be of no avail. Even if the best motor and other configurations are used, the products manufactured will still have defects and be unqualified.

5. Control system: The system of the CNC cutting machine is the brain that controls the whole machine. If a general one is used, there is no need to consider it at all. So, the system versions will also be different. Just like if the software on your mobile phone is not upgraded, some functions may not be realized. Generally, professional equipment manufacturers choose high-end control systems, which not only have a fast operation speed but also good stability.